Trans-dapt 4689 motor mounts

Gettin it in there.

Moderators: Super Mod, Moderators

Trans-dapt 4689 motor mounts

Postby housba2007 » Mon Apr 17, 2017 9:10 pm

Ok so I decided to go with the hedman 69490 long tubes. They say they requir the use of the trans-dapt plates. My question is which motor mounts is everyone using, I have read a bunch where I keep seeing just standard v8 clamshell mounts work. I would like some input on good after market mounts, maybe part #'s and or a link to some good mounts would be greatly appreciated thanks
housba2007
I found rocker arm monkey's on ebay!
 
Posts: 4
Joined: Fri Jun 24, 2016 9:33 pm

Re: Trans-dapt 4689 motor mounts

Postby Rickracer » Tue Apr 18, 2017 5:30 am

Regular frame mounts work just fine, but you can get Anchor 2292 mounts just about anywhere: https://www.summitracing.com/parts/ani-2292 , or these: https://www.summitracing.com/parts/hok- ... onte-carlo , and then add these: https://www.summitracing.com/parts/ens- ... /overview/, :thumbup:

Image

Image

Image
Rickracer
ASE Certified Master Automotive Technician (well over 3 decades of experience, :thumbup: )
'93 S10 SB,RC, Comp XR276 Hydraulic Roller, Vortec head 363, 400 + hp, built 700R4, JW 2800 stall lockup converter, 3.73 posi, disc brake, narrowed 8.8 Exploder rear, LS Camaro front discs, Cal-Trac clone traction bars, Best N/A passes to date: 7.76 in the 1/8th, 12.24@109.27 mph in the 1/4, gonna spray it one of these days... :mrgreen:
76 Chevy Vega Drag Car, TWIN TURBO 355, P/G trans w/ brake and JW 4000 stall vert, 4 link back half, narrowed 9", 3.50 gears, 29.5x10.5W ET Drags. Best time9.669 @ 139.79, Latest video: https://www.youtube.com/watch?v=S59riYn ... ata_player
ImageImage
User avatar
Rickracer
Master Swap Tech
Master Swap Tech
 
Posts: 28693
Joined: Wed Apr 26, 2006 8:02 am
Location: Kissimmee, Fl.

Re: Trans-dapt 4689 motor mounts

Postby housba2007 » Thu Apr 20, 2017 2:33 pm

What about the bracket that bolts to the motor itself are they all the same I'm assuming
housba2007
I found rocker arm monkey's on ebay!
 
Posts: 4
Joined: Fri Jun 24, 2016 9:33 pm

Re: Trans-dapt 4689 motor mounts

Postby 84red85white91green » Thu Apr 20, 2017 4:17 pm

User avatar
84red85white91green
I use a rag as an 710 cap
 
Posts: 657
Joined: Mon Dec 20, 2010 9:02 am
Location: Eastern North Carolina

Re: Trans-dapt 4689 motor mounts

Postby housba2007 » Thu Apr 20, 2017 4:27 pm

I found that gm part no: 10213135 in another post I was reading which trans dapt say to use with these mounts, but problem I'm having is everywhere I looked to buy those clam shells it either says they are not available or are discontinued. That's why I was wondering if there was a alternative? Is the only measurement that matters the one to the mounting hole which is 2.5 inches?
housba2007
I found rocker arm monkey's on ebay!
 
Posts: 4
Joined: Fri Jun 24, 2016 9:33 pm

Re: Trans-dapt 4689 motor mounts

Postby 84red85white91green » Fri Apr 21, 2017 6:35 am

As far as I know the distance to the mounting hole is the only difference.
User avatar
84red85white91green
I use a rag as an 710 cap
 
Posts: 657
Joined: Mon Dec 20, 2010 9:02 am
Location: Eastern North Carolina

Re: Trans-dapt 4689 motor mounts

Postby Kirbystud » Fri Apr 21, 2017 6:36 am

I just got some from Summit Part# OER-332648 $23.97
Kirbystud
Im working on unhooking my battery cables.
 
Posts: 67
Joined: Tue Jul 28, 2015 7:56 am

Re: Trans-dapt 4689 motor mounts

Postby housba2007 » Fri Apr 21, 2017 10:44 am

Ok I have some that where on the small block I'm going to use , but the measurement from the mounting hole on then is like 2 1/4 from what i read people are having the best luck at the 2 1/2 range.
housba2007
I found rocker arm monkey's on ebay!
 
Posts: 4
Joined: Fri Jun 24, 2016 9:33 pm

Re: Trans-dapt 4689 motor mounts

Postby Kirbystud » Mon Apr 24, 2017 5:44 pm

I tried to install the trans-dapt motor mounts this weekend and wasn't happy with them. I think that the motor set to high and the angle of the motor was way to much. And I had all of the right parts. (For my liking) So now I am thinking I want to make my own .
I am thinking of making them solid and having a rubber one on the trans. That is the way I did it years ago. Has anyone done this and how did it work. Back in my days I didn't have the power I have today. Thank for the input.
Kirbystud
Im working on unhooking my battery cables.
 
Posts: 67
Joined: Tue Jul 28, 2015 7:56 am


Return to General Swap

Who is online

Users browsing this forum: No registered users and 2 guests