same truck but new thread for turbo setup

Increasing that volumetric efficiency.

Moderators: Super Mod, Moderators

Re: same truck but new thread for turbo setup

Postby lowblazin94 » Sat Jun 24, 2017 10:47 pm

If there was an award for how to screw things up then i'd call it the "Reverse unengineering Murphys Law Award" and i'd proudly display it next to the crayon coloring book pictures on the refrigerator.
92 S10 Ext cab
385
700r4
User avatar
lowblazin94
TheCowWatcher
 
Posts: 4799
Joined: Wed Jul 20, 2005 8:16 pm
Location: Houston, Tx

Re: same truck but new thread for turbo setup

Postby cookmaster30 » Wed Jul 05, 2017 10:12 pm

gonna pick up the shortblock this weekend but am working with SPS cylinder heads on a set of Haymaker heads for the engine and they will be about 3 weeks before they will be here if all goes well but it will be worth the wait for sure



Image



Image



Image



Image



Image



Image
cookmaster30
I make engine noises when I post.
 
Posts: 955
Joined: Tue Jul 29, 2008 6:19 pm
Location: clarksville, tn

Re: same truck but new thread for turbo setup

Postby cookmaster30 » Wed Jul 05, 2017 10:13 pm

gonna pick up the shortblock this weekend but am working with SPS cylinder heads on a set of Haymaker heads for the engine and they will be about 3 weeks before they will be here if all goes well but it will be worth the wait for sure



Image



Image



Image



Image



Image



Image
cookmaster30
I make engine noises when I post.
 
Posts: 955
Joined: Tue Jul 29, 2008 6:19 pm
Location: clarksville, tn

Re: same truck but new thread for turbo setup

Postby XXXXXXXX » Wed Jul 05, 2017 11:05 pm

Well I was going to leave one of my quirky funny comments... but after seeing those flow numbers I have nothing to say but... holy crap those numbers are off the chart!!

X
82 S10 Longbed.. stock 305.. b&m 144 blower.. 7lbs.. stock 801 heads.. dyno'd 194rwhp...holley 750dp.. percys adjust a jet in the front & rear.. headman 1 1/2 shorty headers.. 2 1/4 dual exhaust with hooker aero chambers.. msd with boost timing master.. 2500 stall .. 700r4 .. 3.73 posi fact s10 disc brake rear end.. caltracs.. 275/60/15 Nitto Extreme 555 drag radials
XXXXXXXX
I drink used anti-freeze
 
Posts: 731
Joined: Wed Aug 05, 2015 9:35 pm

Re: same truck but new thread for turbo setup

Postby lowblazin94 » Wed Jul 05, 2017 11:12 pm

He doesn't look at flow charts, he just starts the timer for when he breaks stuff. It's the dollar to time ratio that matters.
92 S10 Ext cab
385
700r4
User avatar
lowblazin94
TheCowWatcher
 
Posts: 4799
Joined: Wed Jul 20, 2005 8:16 pm
Location: Houston, Tx

Re: same truck but new thread for turbo setup

Postby cookmaster30 » Thu Jul 06, 2017 6:57 am

funny part is that i didnt care about flow numbers as much as i did about the thicker deck and stronger casting haha
cookmaster30
I make engine noises when I post.
 
Posts: 955
Joined: Tue Jul 29, 2008 6:19 pm
Location: clarksville, tn

Re: same truck but new thread for turbo setup

Postby lowblazin94 » Thu Jul 06, 2017 10:33 am

They're going to flow a lot of air no matter what any sheet says. The turbos are the boss in this build. I'm sure their R&D dept will be in constant touch with you.
92 S10 Ext cab
385
700r4
User avatar
lowblazin94
TheCowWatcher
 
Posts: 4799
Joined: Wed Jul 20, 2005 8:16 pm
Location: Houston, Tx

Previous

Return to Forced Induction

Who is online

Users browsing this forum: No registered users and 1 guest