v8s10.org Shirts

PLACE TECH QUESTIONS IN THE APPROPRIATE FORUM!! The lounge is NOT a tech forum!
NO POLITICS, RELIGION, or OFFENSIVE TOPICS! RACISM and HATE will not be tolerated!

Moderators: Super Mod, Moderators

Re: v8s10.org Shirts

Postby XXXXXXXX » Thu Aug 17, 2017 2:56 am

Just make sure who ever you use for payment processor its easy.. so what I mean by that is this.. I only use pre-paid debit cards for any internet transaction.. so make sure if you use pay pal / stripe or who ever they will take a pre-paid.. both should... if you use pay pal.. make sure to use you select the option to pay that "does not" require an account.. in other words a guy can pay just by putting in his info with out setting up a pay pal account. Or if that is a problem I can you send you 30 in cash. Don't forget you will have shipping as well if you are going to ship from your house .. back in the day when I had my tshirt company.. we found that shipping usps with a manila envelope was the most cost effective.. I cant remember now but I think if you stay below 8.5x11 its the cheapest.. in fact for a while we were using 5x8 envelopes cause they were the cheapest to ship.. post office had a deal where you only paid based on what you could stuff in the envelope.. not how much it weighed and that saved us a bundle.. or if you find a really cool silk screening company they may drop ship for you.

X
PS... manila with padding.. the regular ones tore when going through processing at the post office.. the ones with padding were a little thicker plus they had the bubble wrap inside.. but it was really hard and took some serious folding to get 2xl into a 5x8 envelope. If I remember right .. that was like over 10 years ago.

PS PS.. just a text from a friend of mine who sends out shirts from his motor cycle club... he is printing them himself now so he didn't have a recommendation on a silk screener but he did say that he is sending his shirts by fed ex ground in the "cardboard" type of envelope and he said that was the cheapest.. based on prior experience who ever you use make sure you have a tracking number.
82 S10 Longbed.. stock 305.. b&m 144 blower.. 7lbs.. stock 801 heads.. dyno'd 194rwhp...holley 750dp.. percys adjust a jet in the front & rear.. headman 1 1/2 shorty headers.. 2 1/4 dual exhaust with hooker aero chambers.. msd with boost timing master.. 2500 stall .. 700r4 .. 3.73 posi fact s10 disc brake rear end.. caltracs.. 275/60/15 Nitto Extreme 555 drag radials
XXXXXXXX
I drink used anti-freeze
 
Posts: 788
Joined: Wed Aug 05, 2015 9:35 pm

Re: v8s10.org Shirts

Postby mixman98 » Thu Aug 17, 2017 10:49 am

I'm in. I'll order 2 or 3 for sure.
mixman98
WHERES THE CAPS LOCK?
 
Posts: 112
Joined: Tue Dec 13, 2016 3:28 pm

Re: v8s10.org Shirts

Postby Easymoney » Fri Aug 18, 2017 3:06 pm

I would also like two "official" v8s10 shirts if possible.
Size Adult large.
I still have one of those cool stickers from when I first joined. :D
90 S10 short bed. 11.5 @115 with stock 3.08 diff. and a mini spool
Chevy dealership 21 years
ASE master tech with L1 and L2 / GM diesel master tech
Easymoney
Subscribed Member
Subscribed Member
 
Posts: 247
Joined: Fri Mar 25, 2005 4:47 pm
Location: East Tx.

Re: v8s10.org Shirts

Postby lowblazin94 » Fri Aug 18, 2017 4:47 pm

Yes these will be as close to the originals as possible.
92 S10 Ext cab
385
700r4
User avatar
lowblazin94
TheCowWatcher
 
Posts: 5050
Joined: Wed Jul 20, 2005 8:16 pm
Location: Houston, Tx

Re: v8s10.org Shirts

Postby BofoMills » Fri Aug 18, 2017 7:15 pm

Oh man, I wonder if i still have mine. last i remember, it got pretty worn out! I used it a lot. Very comfy shirt.
Rick said don't ask for horsepower if you can't handle it.
User avatar
BofoMills
I've been posting 48hrs straight!
 
Posts: 2476
Joined: Tue Oct 24, 2006 10:10 pm
Location: Lakeland

Re: v8s10.org Shirts

Postby lowblazin94 » Fri Sep 01, 2017 3:04 pm

Shirts are on hold on my mind due to the floods. I will keep everyone posted once everything settles down
92 S10 Ext cab
385
700r4
User avatar
lowblazin94
TheCowWatcher
 
Posts: 5050
Joined: Wed Jul 20, 2005 8:16 pm
Location: Houston, Tx

Re: v8s10.org Shirts

Postby jaymzz » Fri Sep 01, 2017 6:24 pm

Cool let us know. :)
jaymzz
My hoist hit me in the head!
 
Posts: 284
Joined: Wed Nov 26, 2014 7:47 pm
Location: Oregon somewhere

Re: v8s10.org Shirts

Postby mb9ballr » Sat Sep 02, 2017 4:12 pm

lowblazin94 wrote:Shirts are on hold on my mind due to the floods. I will keep everyone posted once everything settles down

Praying for you and everyone else down in TX!!!!
My 1st car was 69 camaro SS/350
I only wrench on the SBC or the 427
91 S10 shortbed
mb9ballr
Im working on unhooking my battery cables.
 
Posts: 26
Joined: Sat Apr 01, 2017 12:06 pm
Location: Virginia

Re: v8s10.org Shirts

Postby XXXXXXXX » Wed Jan 24, 2018 12:59 am

Any updates? I still want one.

X
82 S10 Longbed.. stock 305.. b&m 144 blower.. 7lbs.. stock 801 heads.. dyno'd 194rwhp...holley 750dp.. percys adjust a jet in the front & rear.. headman 1 1/2 shorty headers.. 2 1/4 dual exhaust with hooker aero chambers.. msd with boost timing master.. 2500 stall .. 700r4 .. 3.73 posi fact s10 disc brake rear end.. caltracs.. 275/60/15 Nitto Extreme 555 drag radials
XXXXXXXX
I drink used anti-freeze
 
Posts: 788
Joined: Wed Aug 05, 2015 9:35 pm

Re: v8s10.org Shirts

Postby lowblazin94 » Wed Jan 24, 2018 5:12 pm

Never received the digital image so its at a standstill for now
92 S10 Ext cab
385
700r4
User avatar
lowblazin94
TheCowWatcher
 
Posts: 5050
Joined: Wed Jul 20, 2005 8:16 pm
Location: Houston, Tx

Re: v8s10.org Shirts

Postby S10doug » Mon Feb 05, 2018 4:55 pm

I’ll take a large if you guys decide to make them
S10doug
I found rocker arm monkey's on ebay!
 
Posts: 4
Joined: Sun Feb 04, 2018 2:13 pm

Re: v8s10.org Shirts

Postby s10+5 » Wed Feb 21, 2018 2:04 pm

hell yeah that would be great.
very little compares to firing up a small block or big block Chevy motor for the first time.
1974 K5, 2001 S10 Blazer, 1984 S15
s10+5
I just gutted everything.
 
Posts: 97
Joined: Tue Feb 14, 2017 1:20 pm
Location: Los Angeles, CA

Re: v8s10.org Shirts

Postby XXXXXXXX » Thu Feb 22, 2018 3:44 pm

Re: v8s10.org Shirts

Postby lowblazin94 » Wed Jan 24, 2018 5:12 pm

Never received the digital image so its at a standstill for now


You know..i have a buddy that's a graphic artist.. If someone can get me an image of what it looked like.. I could probably have him put it together.. we use to screen print shirts so he knows what to do.

Let me know.

X
82 S10 Longbed.. stock 305.. b&m 144 blower.. 7lbs.. stock 801 heads.. dyno'd 194rwhp...holley 750dp.. percys adjust a jet in the front & rear.. headman 1 1/2 shorty headers.. 2 1/4 dual exhaust with hooker aero chambers.. msd with boost timing master.. 2500 stall .. 700r4 .. 3.73 posi fact s10 disc brake rear end.. caltracs.. 275/60/15 Nitto Extreme 555 drag radials
XXXXXXXX
I drink used anti-freeze
 
Posts: 788
Joined: Wed Aug 05, 2015 9:35 pm

Re: v8s10.org Shirts

Postby Grind » Thu Feb 22, 2018 9:15 pm

Oh hell, I'm in for XXL, if these ever get printed.
Crusty '91 GMC Sonoma Longbed - many parts available

"Ghost" '93 Chevy S10 Extra Cab -
Lowering, 350 TBI and 8.8 in the works
Sold

2001 GMC Sonoma Ex-cab 4x4 - Totaled

2000 Olds Bravada - Daily Driver... for now

When I die, I hope my girlfriend doesn't sell my truck, for what I've told her I've got into it.
User avatar
Grind
My hoist hit me in the head!
 
Posts: 258
Joined: Thu Apr 24, 2008 11:23 pm
Location: Brookfield, WI

Re: v8s10.org Shirts

Postby Rickracer » Fri Feb 23, 2018 8:14 am

I meant to take a pic of one of my shirts last night and forgot, :? ...I'll try to remember tonight. :hide: :mrgreen:
Rickracer
ASE Certified Master Automotive Technician (well over 3 decades of experience, :thumbup: )
'93 S10 SB,RC, Comp XR276 Hydraulic Roller, Vortec head 363, 400 + hp, built 700R4, JW 2800 stall lockup converter, 3.73 posi, disc brake, narrowed 8.8 Exploder rear, LS Camaro front discs, Cal-Trac clone traction bars, Best N/A passes to date: 7.76 in the 1/8th, 12.24@109.27 mph in the 1/4, gonna spray it one of these days... :mrgreen:
76 Chevy Vega Drag Car, TWIN TURBO 355, P/G trans w/ brake and JW 4000 stall vert, 4 link back half, narrowed 9", 3.50 gears, 29.5x10.5W ET Drags. Best time9.669 @ 139.79, Latest video: https://www.youtube.com/watch?v=S59riYn ... ata_player
Rickracer
Master Swap Tech
Master Swap Tech
 
Posts: 28994
Joined: Wed Apr 26, 2006 8:02 am
Location: Kissimmee, Fl.

Re: v8s10.org Shirts

Postby lowblazin94 » Fri Feb 23, 2018 8:59 am

They WILL get done, I just need a good image
92 S10 Ext cab
385
700r4
User avatar
lowblazin94
TheCowWatcher
 
Posts: 5050
Joined: Wed Jul 20, 2005 8:16 pm
Location: Houston, Tx

Previous

Return to Lounge

Who is online

Users browsing this forum: No registered users and 2 guests

cron