V8S10.ORG

... wanna do. Ok, what I need to know is what all will I need from the donor truck. I'm gonna try to find a 350 out of a 96-99 full size to put in my Blazer. I wanna be able to put it in there and keep everything functioning like stock. I want to keep it stock looking under the hood too. Except for ...

I have a 89 S10 blazer 4x4 4.3 tbi I want to put a 305 or 350 in and keep the ac and c/c. basicly look stock I need to know if i use a motor out of a full size pickup around the same year with the same tbi can i use the same wiring ...

i was taking apart the old 350 in my s10 and was taking apart the valvetrain and what not to see what kind of heads it had on it and what kind of cam. the heads are 801 and i found they were off of a 305 mayby? the cam only says crane blazer 300h. has any body heard of this cam?

Has anyone used a 98 s-10 rear bumper on a 88 blazer or reg s10. They are alot cleaner looking and i'm getting one tomorrow. I'm hoping it will bolt right up... ????

here's a few pics of my blazer. its got a a 305 & 700r tranny. i have a 350 on the side thats gonna built up a little. I'm going for the more of a sleeper look to throw people off. she's not fast yet...... but when she is ........it ...

http://www.s10dragracer.com http://www.blazinlow.com http://www.s10forums.com http://www.s-seriesforum.com Here is a couple other forums and websites http://www.mautofied.com (good to sell cars on) http://www.racingjunk.com http://www.columbusracing.com http://www.ohiodragracers.com http://www.stree...

ok so i have been asking questions for about a month and working slowly at getting my swap done and heres some progress i'll post some pics tomorow but heres some text... its an 85 2dr 2wd transplanting a 68 327 and th350 trans with holley 650 dual feed double pump with torquer2 manifold and hedman ...

Wondering what my 1984 2 door s10 blazer might weigh. cant find any info for the 84 model.... (found that the 88 2door blazer with manual trans weighed 2852) it has a 80-85 350 cid 4 bolt truck motor w/no AC & a TH350 everything else is ...

Just curious as to what temp you guy's S-10/ Blazer's run at .



Mine's running about 190-200 in the fall and thats with a basic waterpump and one electic fan with a 3 core radiator.

well i had most of this stuff in the newbie section and decided to make a truck thread that i can update I had a built 4.3/t56 combo in my blazer. but I decided I wanted some real power and went with a 5.7/t56 combo instead here are some pics, enjoy http://i224.photobucket.com/albums/dd213/6speedblazer/HPIM0482.jpg ...

the blazer seats fit perfect the outside bolt holes are perfectly in line with the bolts for those of us who have a bench seat.You just have to drill the 4 inners.Pics coming soon

hey everyone i havent been on here for a bit i just bought a 2005 2 door blazer 5 spd and i was thinking when the time comes and that 4.3 vortec gose how possible is it to install a 4.8 v8 into a s10 blazer. I know anything can be done but how crazy would that ...

Here are a few more Pictures, Got alot more done today... What do you guys think so far.... It's Pretty Low.... http://i212.photobucket.com/albums/cc163/jkhood/IMG_2802.jpg RH View of Engine http://i212.photobucket.com/albums/cc163/jkhood/IMG_2804.jpg LH View of Engin...

I got a set of Air shocks for my blazer. I'm using a compressor off a lincoln town car to air them up, but looking for a dump valve 0f some sort to let it out using a toggle push button switch... I figure i can let the air out at the track, ...

This used to be a 4x4 blazer 2.8 and i pulled the body and put on a 1985 4 cyl 2wd frame. I believe you will have a personal relationship with your vehicle after enduring all the work involved in a body swap and then an engine swap. ...

Me and joel2005's vids of us messing around today. Me and joelkatdady made some videos of our trucks. Joel's exhaust clip http://i13.photobucket.com/albums/a276/superbeeblaze/th_Joelexhaust.jpg Joel's flyby http://i13.photobucket.com/albums/a276/superbeeblaze/th_MOV00021&...